











Original Spare Parts from Creality 3D...
New product
This product is no longer in stock
Warning: Last items in stock!
Availability date: 2021-12-11
The NEJE Focus Height Adjuster Mounting Bracket is a manually adjustable laser module holder designed for convenient vertical positioning and focus-height adjustment on compatible NEJE laser engraving and cutting machines. It allows users to raise or lower the laser module according to the workpiece thickness and required focusing distance without repeatedly removing or repositioning the mounting assembly.
Featuring a multi-spring adjustment mechanism, integrated anti-slip rubber strip, and secure locking design, the bracket provides smooth height adjustment while helping maintain a stable laser module position during operation. Its compact construction makes it particularly useful for installations where space around the laser head is limited.
Designed for compatibility with the NEJE 5, NEJE Max 4, and NEJE Max 5C, the bracket supports various NEJE laser modules, including the N30610, N30820, N40630, A40630, A40640 II, E40 II, and E80. The mounting interface features M3 fixing holes with 20mm spacing, allowing installation using the appropriate module and machine mounting arrangement.
Original NEJE Focus Height Adjuster: Designed for vertical positioning and manual focus-height adjustment of compatible NEJE laser modules.
Quick Vertical Adjustment: Allows the laser module to be raised or lowered to accommodate different workpiece thicknesses and focusing distances.
Multi-Spring Mechanism: Supports smooth, controlled adjustment, including in compact installation spaces.
Secure Locking Design: Holds the laser module at the selected height to reduce unwanted movement during engraving or cutting.
Integrated Rubber Strip: Provides additional friction and grip for improved mounting stability.
Anti-Slip Construction: Helps maintain consistent laser positioning during machine operation.
Compact Mounting Arrangement: Suitable for compatible NEJE machines without requiring a large external height-adjustment mechanism.
20mm M3 Mounting Hole Spacing: Features a standardized rear mounting arrangement for the specified NEJE configurations.
Installation Accessories Included: Supplied with four mounting screws and a 2.5mm L-shaped hex wrench.
Correct focusing is essential for achieving consistent engraving detail and efficient laser cutting.
A laser module must be positioned at the appropriate distance from the material surface so that the laser beam reaches its intended focus at the workpiece.
When processing materials of different thicknesses, the required module height may change.
The NEJE Focus Height Adjuster allows users to reposition the laser module vertically without dismantling its mounting assembly.
This is particularly useful when switching between:
Thin engraving materials and thicker workpieces
Flat engraving and material cutting
Different wood and plywood thicknesses
Workpieces with different surface heights
Laser modules requiring specific working distances
The adjustable mounting arrangement simplifies the process of finding and maintaining the correct laser-to-material distance.
Important: The bracket adjusts the physical height of the laser module. It does not change the laser's optical focal length. The correct working distance must still be determined according to the specifications of the installed laser module.
The bracket incorporates a multi-spring mechanism designed to support controlled vertical movement.
Its spring-assisted construction helps maintain the adjustment mechanism's engagement while allowing the laser module to be repositioned when required.
This arrangement is particularly useful in compact laser engraving machines where access to conventional mounting screws may be restricted.
The adjustment system provides:
Convenient vertical repositioning
Controlled movement of the mounted laser module
Reduced need for repeated mounting adjustments
Easier access in restricted installation spaces
Practical adjustment for different material thicknesses
The bracket uses a mechanical adjustment system and does not require electrical power or a separate Z-axis motor.
Maintaining a stable laser module position is important for consistent engraving and cutting performance.
Unwanted movement in the mounting assembly can change the laser's working distance and affect the size and concentration of the focused beam.
The NEJE bracket combines a strong locking mechanism with an integrated rubber strip to improve grip and help prevent unintended movement.
Once the module is positioned at the required height, the locking mechanism secures the adjustment.
The anti-slip design is particularly valuable during repeated machine movements, where vibration and acceleration can place mechanical loads on the laser module mounting assembly.
NEJE lists this focus height adjuster for the following laser modules:
| NEJE Laser Module | Compatibility |
|---|---|
| N30610 | Supported |
| B30635 | Supported |
| N30820 | Supported |
| N40630 | Supported |
| A40630 | Supported |
| A40640 II | Supported |
| E40 II | Supported |
| E80 | Supported |
Compatibility refers to the mounting arrangement of the specified modules. The bracket does not provide laser power, cooling, electrical connections, or control functionality.
For other NEJE modules, confirm the mounting-hole arrangement and physical dimensions before installation.
The mounting bracket is intended for the following NEJE laser engraving platforms:
NEJE 5
NEJE Max 4
NEJE Max 5C
These machines support compatible laser module mounting arrangements that allow the focus height adjuster to be installed in the laser head assembly.
The bracket is a mechanical positioning accessory rather than a complete Z-axis drive system.
Compatibility with older NEJE machines, third-party engravers, or modified laser carriages should be checked against the installation dimensions rather than assumed from the brand name alone.
| Specification | Details |
|---|---|
| Brand | NEJE |
| Product Type | Laser Module Focus Height Adjuster |
| Alternative Name | Laser Module Mounting Bracket / Manual Z-Axis Adjuster |
| Adjustment Direction | Vertical (Z-Axis) |
| Adjustment Method | Manual |
| Adjustment Mechanism | Multi-Spring |
| Locking System | Mechanical Anti-Slip Lock |
| Stability Feature | Integrated Rubber Strip |
| Rear Mounting Hole Type | M3 |
| Rear M3 Mounting Hole Spacing | 20mm |
| Compatible Laser Modules | N30610, B30635, N30820, N40630, A40630, A40640 II, E40 II, E80 |
| Compatible Machines | NEJE 5, NEJE Max 4, NEJE Max 5C |
| Adjustment Control | Manual, No Motor Required |
| Included Mounting Screws | 4pcs |
| Included Hex Wrench | 2.5mm L-Shaped |
The NEJE Focus Height Adjuster is designed to be installed between the compatible laser module and the machine's mounting carriage.
For installation:
Switch off the laser engraver and disconnect its power supply.
Remove the existing laser module or mounting hardware as required.
Position the height adjuster according to NEJE's installation diagram.
Align the mounting holes with the corresponding machine and laser module interfaces.
Secure the assembly using the supplied screws and 2.5mm hex wrench.
Install the compatible laser module onto the adjuster.
Check that the module can move vertically without interfering with the machine frame or surrounding components.
Adjust the laser module to the required working height.
Engage the locking mechanism and confirm that the module is firmly secured.
Verify the correct laser focus according to the module manufacturer's instructions before operation.
Mounting Dimension: The distance between the specified M3 fixing holes on the back of the bracket is 20mm. Refer to NEJE's installation dimension diagram when positioning the bracket.
Always ensure that the module is securely locked before operating the laser engraver.
1 × NEJE Focus Height Adjuster Mounting Bracket
4 × Mounting Screws
1 × 2.5mm L-Shaped Hex Wrench
The laser module, engraving machine, and other accessories are not included.
The NEJE Focus Height Adjuster is a manual mounting accessory designed to simplify laser module height positioning on compatible NEJE machines.
Before installation, confirm the 20mm M3 rear mounting-hole spacing and compatibility with the selected laser module. After adjusting the height, securely lock the bracket and verify the correct laser-to-material focusing distance before engraving or cutting.

Rs 9,500.00

Rs 8,000.00

Rs 15,800.00

Rs 39,500.00

Rs 11,500.00

Rs 19,000.00

Rs 4,500.00

Rs 13,500.00

Rs 11,000.00

Rs 35,000.00

Rs 60,000.00

Rs 300.00

Rs 3,000.00

Rs 4,700.00

Rs 26,200.00

Rs 13,100.00

Rs 3,750.00

Rs 3,200.00

Rs 30,000.00

Rs 20,500.00

Rs 38,500.00

Rs 16,000.00

Rs 8,000.00

Rs 4,500.00

Rs 23,500.00

Rs 44,000.00

Rs 105,000.00

Rs 72,500.00

Rs 7,500.00