Polymaker PolyLite PLA 3D Printer Filament 1.75mm 1kg

Please note that this is old stock, and the filament is a bit brittle. You’ll need to heat and remove moisture before use, but it’s at your own risk.
It’s not recommended for new printers with AMS, but it can be used with printers like the Ender 3 Series

PolyLite™ is a family of 3D printing filaments made with the best raw materials to deliver exceptional quality and reliability. PolyLite™ covers the most popular 3D printing materials to meet your everyday needs in design and prototyping.

PolyLite™ PLA is a high-quality PLA designed for reliability and ease of printing.

PRINT SETTINGS

• Nozzle Temperature: 190˚C – 230˚C
• Printing Speed: 40mm/s – 60mm/s
• Bed Temperature: 25˚C – 60˚C
• Bed Surface: Glass with glue, Blue Tape, BuilTak®
• Cooling Fan: ON
• (Based on 0.4 mm nozzle and Simplify 3D v.3.1. Printing conditions may vary with different printers and nozzle diameters)

MECHANICAL PROPERTIES

• Young’s Modulus: 2636 ± 330 Mpa
• Tensile Strength: 46.6 ± 0.9 Mpa
• Bending Strength: 85.1 ± 2.9 Mpa
• Charpy Impact Strength: 2.7 ± 0.2 kJ/m2

THERMAL PROPERTIES

• Glass Transition Temperature: 61˚C
• Vicat Softening Temperature: 63˚C
• Melting Temperature: 150˚C

NOTES

• Drying Settings: 55˚C for 6h
• Recommended Support Materials: PolyDissolve™ S1, PolySupport™

Technical Data Sheet

Safety Data Sheet

RoHS and Reach Test Report