Nozzles

Specials

Creality Unicorn Quick-Swap Nozzle for Ender 3 V3 Ender 3 V3 Plus and K1 Series

New product

Rs 3,200.00

Estimated Delivery: 1 to 3 days

  • 0.4mm

Add to wishlist

More info

The Creality Unicorn Quick-Swap Nozzle is an original integrated nozzle and heatbreak assembly designed for compatible Creality high-speed 3D printers including the Ender-3 V3, Ender-3 V3 Plus, K1C, K1 SE, and newer K1/K1 Max configurations using the integrated Unicorn hotend.

Unlike a conventional screw-in nozzle, the Unicorn design integrates the nozzle, thermal section, and heatbreak into a single precision assembly. This simplifies replacement, reduces the number of threaded sealing interfaces inside the hotend, and helps provide reliable filament flow during high-speed printing.

Its multi-material construction combines efficient heat transfer with a wear-resistant hardened-steel nozzle tip, making it suitable for both everyday filaments and compatible abrasive fiber-reinforced materials.

Key Features

  • Original Creality Unicorn Quick-Swap Nozzle

  • Integrated nozzle and heatbreak construction

  • Available in 0.2mm, 0.4mm, 0.6mm and 0.8mm

  • Copper-alloy thermal section

  • Hardened-steel nozzle tip

  • Designed for high-flow, high-speed extrusion

  • Up to 30mm³/s flow under Creality test conditions

  • Supports compatible abrasive composite filaments

  • Quick replacement compared with conventional multi-piece hotends

  • Compatible with Ender-3 V3, Ender-3 V3 Plus and compatible K1 Series configurations

Available Nozzle Sizes

Creality currently offers the Unicorn Quick-Swap Nozzle in four sizes:

Nozzle SizeTypical Use
0.2mmFine details, small text, miniature models
0.4mmGeneral-purpose printing
0.6mmFaster printing, functional parts, composite materials
0.8mmHigh-flow printing, large models, thick walls

Each size offers a different balance between detail, material flow and printing speed.

0.2mm for Fine Detail

The 0.2mm version is designed for applications where very small extrusion lines and fine details are more important than maximum printing speed.

Suitable applications include:

  • Miniatures

  • Small lettering

  • Fine decorative features

  • Detailed prototypes

  • Small precision models

Because of the small opening, printing speeds and volumetric flow normally need to be reduced compared with larger nozzles.

0.4mm General-Purpose Nozzle

The 0.4mm version provides the most balanced combination of:

  • Print detail

  • Speed

  • Surface finish

  • Layer strength

  • Material flow

It is a practical choice for most everyday printing and is suitable for a wide range of models and materials.

0.6mm for Higher Flow

The 0.6mm nozzle allows more filament to pass through the hotend than a 0.4mm nozzle.

It is useful for:

  • Faster printing

  • Larger models

  • Functional components

  • Thicker walls

  • Higher layer heights

  • Fiber-filled materials

The larger opening is also commonly preferred for composite filaments because it reduces the likelihood of particles contributing to nozzle blockage.

0.8mm for Maximum Throughput

The 0.8mm version is designed for applications where high material flow and printing speed are more important than fine surface detail.

It is well suited to:

  • Large prototypes

  • Structural parts

  • Rapid functional models

  • Thick-wall printing

  • Large-format components

A suitable slicer profile should be used whenever changing nozzle diameter.

Integrated Unicorn Design

The Unicorn nozzle differs significantly from traditional screw-in nozzles.

The nozzle and heatbreak are integrated into one assembly, helping reduce problems associated with incorrectly tightened connections between separate hotend components.

Advantages include:

  • Faster replacement

  • Simplified hotend servicing

  • Reduced internal sealing interfaces

  • Consistent assembly geometry

  • Lower risk of filament leakage caused by an incorrectly assembled nozzle/heatbreak joint

Copper Alloy for Efficient Heating

The thermal portion of the Unicorn nozzle uses copper alloy to provide efficient heat transfer.

Good thermal conductivity helps transfer energy from the ceramic heater into the filament quickly, which becomes especially important when printing at high material flow rates.

This supports:

  • Faster filament melting

  • Stable extrusion

  • High-flow printing

  • More consistent temperature transfer

  • High-speed printer operation

Hardened-Steel Nozzle Tip

The actual extrusion tip uses hardened steel for improved wear resistance.

This makes the nozzle suitable for compatible abrasive materials containing fillers such as:

  • Carbon fiber

  • Glass fiber

  • Other abrasive reinforcement materials

A hardened tip helps reduce nozzle-opening wear compared with conventional soft brass nozzles.

Suitable for Composite Filaments

Creality lists compatibility with materials including:

  • PLA

  • ABS

  • PETG

  • TPU

  • PP

  • PC

  • PLA-CF

  • PA-CF

  • PET-CF

Actual material compatibility also depends on the printer's maximum hotend temperature, enclosure, build surface, filament drying requirements, and other machine specifications.

High-Flow Melt Zone

The Unicorn nozzle uses an enlarged internal melting chamber designed for high-flow extrusion.

Creality specifies a maximum flow rate of approximately:

Up to 30mm³/s

under its stated test conditions.

Higher volumetric flow allows compatible printers to maintain extrusion while moving at significantly higher printing speeds.

Actual achievable flow depends on:

  • Filament material

  • Nozzle diameter

  • Nozzle temperature

  • Layer height

  • Extrusion width

  • Printer profile

  • Material quality

Supports High-Speed Printing

The Unicorn nozzle system is designed around Creality's high-speed printer platforms.

Creality promotes the system for printing speeds up to:

600mm/s

on compatible machines under suitable printing conditions.

The actual printing speed of a model will vary according to geometry, flow rate, acceleration, cooling, filament and quality requirements.

Quick-Swap Maintenance

The integrated design simplifies nozzle replacement compared with traditional hotends where the nozzle must be separately hot-tightened against a heatbreak.

The Unicorn assembly can be removed as a complete unit after accessing the hotend.

This makes it useful for users who regularly:

  • Change nozzle diameter

  • Print abrasive filament

  • Maintain multiple printers

  • Replace worn nozzles

  • Service print-farm machines

Technical Specifications

SpecificationDetails
Product TypeIntegrated Quick-Swap Nozzle
BrandCreality
Product SeriesUnicorn
Filament Diameter1.75mm
Available Nozzle Sizes0.2 / 0.4 / 0.6 / 0.8mm
Thermal Section MaterialCopper Alloy
Nozzle Tip MaterialHardened Steel
ConstructionIntegrated Nozzle + Heatbreak
Maximum Stated FlowUp to 30mm³/s under specified conditions
High-Speed Printing SupportUp to 600mm/s on compatible printers
0.4mm Part Number4008030071
0.6mm Part Number4008030072
0.8mm Part Number4008030083
0.2mm Part Number4008030084
Individual Package SizeApprox. 40 × 18 × 96.5mm
Individual Gross WeightApprox. 18g

Compatibility

Compatible with:

  • Creality Ender-3 V3

  • Creality Ender-3 V3 Plus

  • Creality K1C

  • Creality K1 SE

  • Creality K1 with integrated Unicorn-style hotend

  • Creality K1 Max with integrated Unicorn-style hotend

Important K1 / K1 Max Compatibility Note

K1 and K1 Max have been produced with different hotend configurations.

Older K1 and K1 Max machines may use the earlier heater-block design with a separate M6 nozzle and are not directly compatible with the Unicorn nozzle.

Newer/revised K1 and K1 Max machines using the integrated Unicorn-style hotend can use this nozzle.

Before ordering for K1 or K1 Max, compare the installed hotend with the Unicorn design or confirm the printer's hotend revision.

Not Compatible with Older M6 Hotend Without Upgrade

The Unicorn nozzle is not a conventional M6 screw-in nozzle.

Do not use it as a direct replacement for older:

  • K1 M6 nozzle hotends

  • K1 Max M6 nozzle hotends

  • Ender-3 V3 KE standard M6 hotend

  • Ender-3 V3 SE hotend

These machines/configurations use different nozzle geometry unless the complete hotend has been upgraded to a compatible integrated Unicorn system.

Choosing the Correct Nozzle Size

RequirementRecommended Size
Maximum Fine Detail0.2mm
General Printing0.4mm
Faster Functional Printing0.6mm
Large / High-Flow Parts0.8mm
Composite Filament0.6mm or larger often preferred

Filament manufacturers may specify a minimum nozzle diameter for fiber-filled materials. Always follow the filament manufacturer's recommendation.

Slicer Configuration

Whenever the nozzle diameter is changed, update the printer profile in the slicer.

Important parameters include:

  • Nozzle diameter

  • Line width

  • Layer height

  • Maximum volumetric flow

  • Printing speed

  • Temperature

  • Retraction

  • Cooling settings

Using slicer settings for the wrong nozzle diameter can result in incorrect extrusion and poor print quality.

Installation Note

Before replacing the Unicorn nozzle:

  1. Unload the filament.

  2. Follow the printer's nozzle replacement procedure.

  3. Switch off the printer when instructed.

  4. Allow the hotend to cool before handling the assembly.

  5. Remove the printhead cover and silicone sock as required.

  6. Disconnect or release the nozzle assembly according to the printer design.

  7. Remove the existing Unicorn nozzle.

  8. Install the replacement assembly fully into position.

  9. Reassemble the hotend and printhead.

  10. Select the correct nozzle diameter in the printer and slicer.

  11. Perform calibration if required before printing.

Always take care around the heater and sensor wiring during hotend servicing.

When to Replace the Nozzle

Replacement may be useful when experiencing:

  • Worn nozzle opening

  • Physical nozzle-tip damage

  • Persistent clogging

  • Reduced extrusion consistency

  • Damage following a filament blob

  • Material leakage

  • Requirement for a different nozzle diameter

Always identify the actual cause of an extrusion problem before replacing the nozzle.

Package Includes

  • 1 × Creality Unicorn Quick-Swap Nozzle in the selected diameter

Available sizes:

  • 0.2mm

  • 0.4mm

  • 0.6mm

  • 0.8mm

Usage Note

The Creality Unicorn Quick-Swap Nozzle combines an integrated heatbreak design, copper-alloy thermal section and hardened-steel extrusion tip to provide convenient maintenance, high material flow and resistance to abrasive filament wear.

For K1 and K1 Max, confirm that the printer is equipped with the newer integrated Unicorn hotend before ordering. Older K1/K1 Max machines using the separate M6 nozzle system require a different nozzle or a compatible hotend upgrade.

24 other products in the same category:

Customers who bought this product also bought: