Nozzles

Specials

Creality High Speed M6 Brass Nozzle for Ender 3 V3 SE

New product

Rs 260.00

Estimated Delivery: 1 to 3 days

  • 0.4mm

Add to wishlist

More info

The Creality High Speed M6 Brass Nozzle is an original replacement nozzle designed for the Ender-3 V3 SE and other compatible Creality high-speed hotend systems using the same extended M6 nozzle format.

Manufactured from H59 brass, the nozzle combines good thermal conductivity with smooth filament flow for everyday FDM printing. Its 0.4mm opening provides a practical balance between print detail, layer consistency, and printing speed, making it suitable as a direct replacement for the standard nozzle used on the Ender-3 V3 SE.

Unlike a conventional short MK8-style M6 nozzle, this Creality nozzle uses a longer 16.8mm overall format. Matching the correct nozzle length is important for proper sealing inside the hotend.

Key Features

  • Original Creality replacement nozzle

  • Part number 4004020054

  • Designed for Ender-3 V3 SE

  • H59 brass construction

  • M6 threaded installation

  • 0.4mm nozzle opening

  • 16.8mm overall nozzle length

  • Suitable for high-speed FDM printing

  • Good thermal conductivity for stable extrusion

  • Direct replacement for compatible Creality hotends

H59 Brass Construction

The nozzle is manufactured from H59 brass, a copper-zinc alloy commonly used for standard FDM printer nozzles.

Brass provides good thermal conductivity, helping transfer heat efficiently from the heater block into the filament as it passes through the melt zone.

This makes it particularly suitable for common non-abrasive materials such as:

  • PLA

  • PETG

  • TPU

  • Other standard non-abrasive 1.75mm filaments

0.4mm Nozzle Diameter

The nozzle has a:

0.4mm outlet diameter

This is the standard nozzle size used by the Ender-3 V3 SE and provides a useful balance between:

  • Surface detail

  • Printing speed

  • Layer strength

  • Filament flow

  • General-purpose printing

It is suitable for most everyday models, prototypes, mechanical parts, and decorative prints.

High-Speed Nozzle Format

Creality classifies this part as a High-Speed M6 Nozzle.

Its geometry is designed for compatible Creality high-speed hotend systems, including the hotend architecture used by the Ender-3 V3 SE.

Using the correct nozzle type helps maintain:

  • Proper hotend sealing

  • Consistent extrusion

  • Reliable filament flow

  • Correct nozzle position relative to the build plate

16.8mm Extended Nozzle Length

This nozzle has an overall length of approximately:

16.8mm

This dimension is important.

Although many traditional 3D printer nozzles also use an M6 thread, they may have a shorter body.

A conventional short M6 nozzle should not automatically be treated as a replacement simply because the thread diameter matches.

The nozzle must also match the correct:

  • Overall length

  • Thread engagement

  • Internal hotend geometry

  • Sealing position

Using the wrong nozzle format can potentially create a gap inside the hotend and lead to filament leakage or clogging.

M6 Thread

The threaded mounting section uses:

M6 thread

This allows the nozzle to screw directly into the compatible heater block.

Correct installation torque and hot-tightening procedure are important to create a proper seal between the nozzle and internal hotend components.

Designed for Ender-3 V3 SE

This nozzle is directly compatible with:

  • Creality Ender-3 V3 SE

Creality also lists compatibility with:

  • Creality Ender-5 S1

  • Creality Ender-7

These printers use compatible nozzle geometry.

Suitable for Standard Filaments

The H59 brass nozzle is particularly suitable for standard, non-abrasive FDM materials.

Typical examples include:

  • PLA

  • PLA+

  • Hyper PLA

  • PETG

  • TPU

The Ender-3 V3 SE itself supports nozzle temperatures up to 260°C, so actual printing temperature should remain within the printer and filament manufacturer's recommended limits.

Not Intended for Heavy Abrasive Use

Brass is an excellent general-purpose nozzle material, but abrasive additives can gradually wear the nozzle opening.

Materials containing significant amounts of:

  • Carbon fiber

  • Glass fiber

  • Glow-in-the-dark particles

  • Metal powder

  • Other abrasive fillers

can wear brass nozzles faster than standard filament.

For frequent abrasive-material printing, a compatible hardened or wear-resistant nozzle is generally more appropriate.

When to Replace a Nozzle

A nozzle is a consumable component and may gradually wear or become damaged during normal printer use.

Replacement may be useful when experiencing:

  • Persistent partial clogging

  • Irregular extrusion

  • Excessive stringing after other causes are eliminated

  • Damaged nozzle tip

  • Worn nozzle opening

  • Filament leakage caused by damaged sealing surfaces

  • Reduced print consistency

Before replacing the nozzle, also check filament condition, extruder operation, temperature settings, and hotend cleanliness.

Technical Specifications

SpecificationDetails
Product Type3D Printer Nozzle
BrandCreality
Part Number4004020054
Nozzle TypeHigh-Speed M6
Nozzle MaterialH59 Brass
Nozzle Diameter0.4mm
ThreadM6
Overall Length16.8mm
ColorNatural Brass
Net WeightApprox. 3g
Package WeightApprox. 5g
Package SizeApprox. 110 × 100 × 20mm
Primary CompatibilityEnder-3 V3 SE

Compatible Printers

Compatible with:

  • Creality Ender-3 V3 SE

  • Creality Ender-5 S1

  • Creality Ender-7

Applications

  • Ender-3 V3 SE nozzle replacement

  • Routine printer maintenance

  • Replacement of worn brass nozzle

  • Recovery from persistent nozzle clogging

  • General PLA printing

  • PETG printing

  • TPU printing

  • High-speed FDM printing

  • Printer servicing and spare-part inventory

Installation Note

Nozzle replacement should be performed carefully because the hotend must normally be heated before the nozzle is loosened or finally tightened.

Recommended procedure:

  1. Unload the filament.

  2. Heat the hotend to an appropriate servicing temperature.

  3. Remove the silicone sock if required.

  4. Hold the heater block securely with a suitable tool.

  5. Carefully loosen and remove the old nozzle.

  6. Install the new nozzle.

  7. Hold the heater block while performing final tightening.

  8. Reinstall the silicone sock.

  9. Allow the hotend to cool.

  10. Check the first layer before starting a long print.

Avoid twisting the heater block, heater wires, or thermistor wires while removing the nozzle.

Important Compatibility Note

Do not select a replacement nozzle based only on the M6 thread.

This Creality nozzle uses the specific:

M6 × 0.4 × 16.8mm

format required by compatible printers.

Always confirm the nozzle's complete geometry before installation.

Package Includes

  • 1 × Creality High Speed M6 H59 Brass Nozzle – 0.4mm

Usage Note

This product is the Creality 4004020054 High-Speed M6 Brass Nozzle.

For the Ender-3 V3 SE, use the correct 16.8mm nozzle format rather than a conventional short M6/MK8 nozzle, even if the thread appears similar.

24 other products in the same category:

Customers who bought this product also bought: