Diode Laser Modules

New Sale! NEJE E30 NEJE01180 7W Diode Laser Module Kit View larger

NEJE E30 NEJE01180 7W Diode Laser Module Kit

New product

This product is no longer in stock

Rs 45,000.00

Estimated Delivery: 3 to 6 weeks

Add to wishlist

More info

Warranty Exclusions:
Diode laser modules are consumable products and are therefore not covered under warranty.

The NEJE E30 NEJE01180 7W Diode Laser Module Kit is a high-resolution blue diode laser module developed primarily for fine engraving, grayscale artwork, and detailed surface marking. Combining a high-performance Nichia laser diode with NEJE's multi-lens beam compression technology, the E30 produces a concentrated laser spot suitable for intricate designs on wood, anodized aluminium, stainless steel, ceramics, and other compatible materials.

Delivering up to 7W peak optical output, the E30 is optimized for precision rather than maximum cutting thickness. Its short-focus optical design provides high energy density at the material surface, making it particularly effective for photographic engraving, fine lettering, decorative patterns, and high-detail marking on flat workpieces.

The module also features intelligent fan control, temperature feedback, a protective optical window, and support for continuous operation under suitable cooling conditions. With NEJE-listed 12V and 24V DC compatibility, it can be integrated into supported NEJE laser engraving systems and appropriately configured CNC laser machines.

Key Features

  • 7W Peak Optical Output: Uses a high-performance Nichia laser diode for detailed engraving and light cutting.

  • Multi-Lens Beam Compression: Produces a concentrated laser spot with high energy density for precision surface processing.

  • High-Resolution Engraving: NEJE publishes engraving capability of up to 635 DPI, depending on the application and configuration.

  • Short-Focus Optical Design: Optimized for detailed engraving and thin-material cutting on relatively flat surfaces.

  • Excellent Grayscale Engraving: Suitable for photographic designs, fine artwork, and detailed patterns on wood and compatible surfaces.

  • Direct Metal Surface Marking: Supports engraving or marking suitable stainless steel and anodized aluminium without cutting into the metal sheet.

  • Protective Optical Window: Helps protect the internal focusing optics from smoke and processing debris.

  • Intelligent Cooling Fan: Uses temperature-responsive fan operation to support continuous laser processing.

  • Temperature Feedback: Supports temperature monitoring through compatible NEJE control equipment.

  • 12V/24V Compatibility: Suitable for manufacturer-supported power configurations when correctly connected.

7W Nichia Laser Diode with Multi-Lens Compression

The NEJE E30 uses a premium Nichia laser diode combined with a multi-element optical system.

Laser diodes naturally emit light with different divergence characteristics along their horizontal and vertical axes. An optical compression system reshapes and concentrates this light to produce a more controlled focal spot.

NEJE uses multiple lens elements to improve the concentration of laser energy at the material surface.

This provides the E30 with high optical energy density, allowing it to create fine marks without relying solely on higher laser power.

The main benefits include:

  • Fine engraving lines and small details

  • Controlled surface marking

  • High-contrast engraving on suitable materials

  • Improved detail in photographic images

  • Precise engraving of logos and lettering

  • Efficient processing of thin materials

The manufacturer's 7W rating refers to optical output, not the module's electrical power consumption.

Ultra-High-Resolution Engraving

The E30 is designed for applications where engraving detail is more important than cutting large quantities of thick material.

NEJE describes the module as suitable for ultra-high-resolution engraving, with published specifications indicating up to 635 DPI.

DPI, or dots per inch, describes the spacing of engraving detail along a given distance.

At 635 DPI, the nominal distance between adjacent image samples is approximately 0.04mm.

This makes the E30 particularly suitable for:

  • High-detail photographic engraving

  • Fine text and miniature lettering

  • Decorative line patterns

  • Portraits and grayscale artwork

  • Intricate logos

  • Surface engraving of anodized aluminium

  • Detailed stainless steel marking

  • Fine designs on coated ceramics

The achievable engraving detail depends on the material, machine movement accuracy, focus, selected scan interval, and software settings.

The advertised DPI capability should not be confused with the mechanical positioning accuracy of the engraving machine.

Specialized Short-Focus Optical System

The E30 uses a short-focus optical design optimized for engraving relatively flat workpieces.

A short-focus laser system can concentrate optical energy into a small area, producing high energy density at the material surface.

This is useful for detailed engraving because a smaller illuminated area allows the laser to create narrow lines and closely spaced features.

Unlike NEJE's A40630 and A40640 modules, which offer adjustable optical focusing configurations, the E30 is primarily designed around a specialized short-focus arrangement.

The working height is set by positioning the laser module at the appropriate distance from the workpiece.

This distinction is important when choosing between NEJE laser modules.

E30 Focus Characteristics

  • Optimized for fine surface engraving

  • Particularly suitable for flat workpieces

  • High energy concentration at the focal point

  • Supports detailed grayscale and line engraving

  • Less suited to deep cutting than modules designed for greater focus depth

For consistent results, the workpiece surface should remain close to the correct focal plane.

High-Detail Wood and Grayscale Engraving

Wood engraving is one of the main applications of the NEJE E30.

Its concentrated laser spot is useful for creating fine lines and controlling the visible contrast between engraved and unengraved areas.

By varying the laser output and movement settings, users can produce different shades and tonal effects on suitable wood surfaces.

Typical applications include:

  • Photographic portraits

  • Personalized wooden gifts

  • Decorative plaques

  • Custom signs

  • Small text and logos

  • Fine illustrations

  • Detailed patterns

  • Artwork on hardwood and softwood

Grayscale engraving quality depends heavily on the wood species, grain, moisture content, surface finish, and selected laser settings.

For best results, use suitable image processing and perform material tests before engraving the final workpiece.

Stainless Steel and Anodized Aluminium Marking

NEJE specifically highlights the E30's ability to produce detailed surface marks on compatible metal materials.

Its concentrated beam is particularly useful for:

Stainless Steel

The E30 can produce visible surface marks on suitable stainless steel under appropriate conditions.

Depending on the material and engraving settings, different tones and surface effects may be achievable.

NEJE demonstrates decorative engraving and color-like surface marking effects on stainless steel, although the results depend on the alloy, finish, and processing conditions.

Anodized Aluminium

Anodized aluminium is well suited to high-detail laser marking because the laser can modify the anodized surface.

The E30 can produce fine text, graphics, logos, identification markings, and decorative designs on suitable anodized aluminium surfaces.

Coated and Plated Metals

The module may also mark or selectively remove compatible surface coatings.

Important: The E30 is intended for metal surface marking, not for cutting metal sheets. Engraving performance on bare metals depends on the surface finish and material properties.

Engraving and Cutting Materials

The NEJE E30 is suitable for several materials when the appropriate processing settings are used.

MaterialTypical Application
Natural WoodHigh-detail engraving, photographs, and decorative artwork
HardwoodFine line engraving and surface marking
PlywoodDetailed engraving and light cutting
BambooLogos, lettering, and decorative designs
Anodized AluminiumFine surface marking and identification
Stainless SteelSurface engraving and decorative marking
Painted or Coated MetalMarking or removing compatible coatings
Slate and StoneDecorative surface engraving
CeramicsSurface marking under suitable conditions
Coated GlassEngraving of suitable coated surfaces
AcrylicMarking suitable absorbing or prepared surfaces
Paper and CardboardDetailed engraving and thin-material cutting
Suitable LeatherEngraving and light cutting

Transparent Material Limitations

NEJE lists engraving applications involving transparent acrylic and glass, but these require careful distinction from cutting capability.

A blue diode laser generally cannot directly cut clear acrylic because much of its blue light passes through the material rather than being absorbed.

Visible markings on transparent materials may require a suitable coating, treatment, or surface condition.

The E30 should not be selected for cutting clear acrylic sheets. A suitable CO₂ laser cutting machine is generally more appropriate for that application.

Avoid laser processing PVC, vinyl, and unidentified plastics that can release hazardous or corrosive fumes.

Precision Cutting of Thin Materials

Although the E30 can cut certain materials, its optical system is primarily optimized for precision engraving.

NEJE describes the E30 as suitable for fine cutting of materials thinner than approximately 2mm, subject to the material and processing conditions.

Typical light-cutting applications include:

  • Thin plywood

  • Paper

  • Cardboard

  • Thin wood veneer

  • Selected thin leather materials

  • Suitable light craft materials

Its concentrated beam can produce fine cutting lines when the material thickness and laser settings are appropriate.

However, the short-focus arrangement limits its suitability for thicker workpieces, where maintaining sufficient energy throughout the material becomes more difficult.

For users primarily interested in cutting thicker plywood, MDF, or acrylic, a higher-power module with an optical system designed for cutting may be a more appropriate choice.

Intelligent Cooling and Temperature Feedback

The NEJE E30 incorporates a cooling system designed to support stable laser operation.

Its internal electronics monitor operating conditions and regulate cooling fan behaviour according to the module's thermal requirements.

NEJE identifies the following features:

  • Intelligent fan control

  • Dynamic low-noise operation

  • Temperature feedback

  • Support for continuous operation

  • Anti-static protection

  • Integrated driver electronics

The intelligent fan system helps reduce unnecessary fan noise while maintaining cooling when required.

Correct cooling is important because excessive laser diode temperature can reduce optical efficiency and accelerate component degradation.

The cooling fan and heatsink must remain unobstructed during operation.

Protective Optical Window

The E30 incorporates a protective optical window positioned between the internal optics and the processing environment.

Its purpose is to reduce contamination of the internal focusing elements from smoke and debris generated during engraving.

NEJE describes the window as having a high-temperature-resistant construction with optical coatings designed for efficient transmission of the laser wavelength.

This is particularly valuable for frequent engraving applications where smoke and fine particles are produced close to the laser outlet.

The protective window should be inspected periodically and cleaned using the manufacturer's recommended method.

A protective window reduces contamination risk but does not eliminate the need for smoke extraction or appropriate maintenance.

Airflow and Smoke Management

The E30 includes an airflow arrangement that NEJE describes as providing automatic smoke removal around the optical outlet.

This helps reduce accumulation of smoke and processing residue during engraving.

For detailed engraving on flat materials, the integrated arrangement may be sufficient without adding a separate high-pressure air-assist system.

However, external air assistance can still be useful for certain cutting applications where debris removal is important.

The need for additional airflow depends on the material, cutting thickness, and processing requirements.

Smoke extraction and ventilation remain necessary regardless of the module's internal airflow features.

Technical Specifications

SpecificationDetails
BrandNEJE
ModelE30
Supplier ReferenceNEJE01180
Product TypeBlue Diode Laser Module Kit
Maximum Optical Output7W Peak
Laser SourceNichia High-Power Diode
Optical SystemMulti-Lens Beam Compression
Focus ConfigurationSpecialized Short-Focus
Published Engraving ResolutionUp to 635 DPI
Supported Operating Voltage12V / 24V DC, Manufacturer-Supported Configurations
Continuous OperationSupported with Adequate Cooling
Temperature FeedbackSupported
Cooling SystemIntelligent Fan Cooling
Fan ControlDynamic Low-Noise Technology
Anti-Static ProtectionSupported
Optical ProtectionHigh-Temperature-Resistant Protective Window
Primary ApplicationPrecision Engraving and Surface Marking
Secondary ApplicationFine Cutting of Suitable Thin Materials
Recommended Cutting EmphasisMaterials Below Approximately 2mm
Compatible MaterialsWood, Anodized Aluminium, Stainless Steel, Ceramics, Coated Surfaces, and Suitable Thin Materials
Machine IntegrationCompatible NEJE and Suitable Custom Laser Systems

NEJE E30 vs NEJE A40630

The E30 and A40630 both offer up to 7W optical output, but they are designed for different priorities.

FeatureNEJE E30NEJE A40630
Peak Optical Power7W7W
Optical DesignMulti-Lens CompressionFAC-Based Optical System
Focus DesignSpecialized Short-FocusAdjustable Focus
Primary StrengthUltra-Fine EngravingGeneral Engraving and Cutting
Grayscale ArtworkParticularly SuitableSupported
Fine Metal Surface MarkingParticularly SuitableSupported
Thin Material CuttingSupportedSupported
Thicker Material CuttingNot the Main Design PriorityMore Suitable with Correct Focusing and Air Assist
Typical WorkpiecesFlat Surfaces and Detailed ArtworkMore Varied Engraving and Cutting Applications

The E30 is the more specialized engraving-focused option, particularly for detailed grayscale images and surface marking.

The A40630 provides greater focusing flexibility, making it more suitable for users who want a balance between engraving and cutting applications.

Machine Compatibility and Installation Requirements

NEJE uses the E30 across compatible laser engraving configurations and supports its integration with suitable laser motion-control systems.

Before installation, verify:

  • Mechanical mounting arrangement

  • Module dimensions and carriage clearance

  • Compatible DC power supply

  • Correct controller output and electrical interface

  • Laser power-control compatibility

  • Temperature-feedback wiring, where used

  • Focusing height adjustment

  • Appropriate enclosure and ventilation

Although NEJE lists both 12V and 24V support for the E30 module, the correct supply voltage and wiring must be confirmed for the actual module and kit revision.

Important: Do not assume that a supplied laser controller or adapter will convert voltage automatically. Always follow the electrical markings and connection instructions for the exact hardware configuration.

This product is a laser module kit, not a complete laser engraving machine. A compatible machine, controller, electrical supply, and appropriate laser safety equipment are required.

Laser Safety and Maintenance

The E30 is a high-power blue diode laser module that must be treated as a Class 4 laser hazard during operation.

Its concentrated beam can cause severe eye injury, skin burns, and ignition of combustible materials.

Safe operation requires:

  • Properly rated protective eyewear for the laser wavelength and optical power

  • A suitable laser safety enclosure

  • Effective smoke extraction

  • Appropriate fire prevention measures

  • Protection from direct and reflected laser exposure

  • Supervision during engraving and cutting

Never use the module in an open area where bystanders may be exposed to the beam.

Keep the optical window, cooling fan, and heatsink clean and inspect the module regularly for dust or residue accumulation.

Do not attempt to operate the laser if the optical window is damaged or the cooling system is malfunctioning.

Warranty Information

ZENIX Warranty Note: Diode laser modules are considered consumable components and are not covered by warranty, whether purchased separately or supplied as part of a laser engraving or cutting machine.

Usage Note

The NEJE E30 NEJE01180 is a 7W peak-output diode laser module specifically optimized for high-detail engraving, photographic artwork, and surface marking.

Its short-focus multi-lens optical design makes it particularly suitable for precision work on flat materials, while light cutting capability is intended primarily for thin materials.

For thicker-material cutting, an adjustable-focus A40630 or more powerful cutting-oriented module may be more appropriate.

The E30 cannot directly cut clear acrylic or metal sheets. Verify the module's mounting and electrical requirements before installation.

10 other products in the same category: