> >>>>NEJE A40630 NEJE00829 30W Diode Laser Module Kit with Air Assist (Support SS Engraving)

Diode Laser Modules

New products

Specials

New Sale! NEJE A40630 NEJE00829 30W Diode Laser Module Kit with Air Assist (Support SS Engraving) View larger

NEJE A40630 NEJE00829 30W Diode Laser Module Kit with Air Assist (Support SS Engraving)

New product

Brand: NEJE

Supplier SKU: NEJE00829

Input: 30-50W

Optical Output: 5.5-7.5W

Note: NEJE00829 has the Laser Mount

More details

Rs 30,000.00

Estimated Delivery: 1 to 3 days

Add to wishlist

More info

Special Note: 

Diode laser modules do not have a warranty, since it is a consumable product.

The official data of the life of the laser head is 10000-20000 hours, but not guaranteed. Overloading may shorten the life of the laser head.

It is ok to work continuously for about 30 minutes, after the laser module cools down for about half of an hour (or one hour for better results), then start work again. Long time continuously work will shorten the laser module's lifetime.

Feature
  1. Designed for laserGRBL, lightburn, Laser Engraver, 3D printer, CNC mill, and Arduino project.
  2. 5.5W Optical power output, 4mm plywood from 1 pass(speed 100).
  3. More Safety, Built-in protective glass to protect eyes! Even without wearing protective glasses, the operation is more comfortable.
  4. More Quiet, Intelligent drive adjust the cooling fan speed according to laser temperature.
  5. Easy use, Digital PWM wave pulse signal generator adjustable frequency duty cycle board for NEJE laser module.
  6. The slidable mounting fixture is provided for easy adjustment of focus.
 
Specification
  • Model： A40630
  • Heatsink Material： Aircraft Aluminum + Brass Shell 
  • Luminous Color： Blue 
  • Section Size：40mm x 40mm 
  • Cooling Mode： Temperature sensor intelligent control + 10000 rpm 40mm cooling fan 
  • Dimension：60 * 40 * 40mm 
  • Adapter Plug：5.5 2.1 port
  • Can Engrave：Rock/Stainless Steel/MDF/Balsa/Paper/Wood/Fabric/Plastic/Leather/Plywood/Foam Paper/Anodized Aluminum
  • Can Not Engrave：Glass/Stone/Ceramics/PCB/Reflective Material/ Transparent Material
Technical Parameters  
  • Module Input：30-50W
  • Optical power output：5.5W (7.5W Pulse)
  • Wavelength：445-450nm
  • Beam Shape： Dot (Focusable)
  • Working Voltage： DC 12V
  • TTL&PWM Modulation： YES, Compatible with Both TTL & PWM Modulation
  • Input Voltage： DC12V 4A
  • PWM/TTL Input：DC3.3V-12V
  • Input Interface：PH2.0-4Pin (+,-, PWM/TTL, Temperature), 3Pin (+,-, PWM/TTL) , 2Pin+2Pin (+,-) + (PWM/TTL,-)
  • NOTE： The temperature interface can be disconnected， NEJE provides text instructions for temperature acquisition on the wiki.
  • Drive Mode： External ACC
  • Safe temperature range：<60 ℃
  • Module weight：202g ( The lighter the weight, the smaller the moving inertia, the better the performance )
  • Life Time：10000-20,000 hours

Digital PWM Wave Pulse Signal Generator Adjustable Frequency Duty Cycle for NEJE Laser Module tester board Specification
Power input: DC 12V
Output: PH2.0 4pin (12v,GND, PWM/TTL, Temperature)
mode: 3 modes (off, manual PWM, PWM / TTL in)
Manual PWM control: YES

5 other products in the same category:

Customers who bought this product also bought: