Lubricant and Thermal Grease

Specials

Creality Thermal Grease for 3D Printers

ZSP102881

New product

Rs 870.00

Estimated Delivery: 1 to 3 days

Add to wishlist

More info

The Creality Thermal Grease for 3D Printers is a high-performance thermal interface compound designed to improve heat transfer between compatible components in FDM 3D printers. Featuring a thermally conductive, electrically insulating formulation, it helps reduce thermal resistance at metal-to-metal contact surfaces, supporting efficient heat dissipation and stable operating temperatures.

With a thermal conductivity of 12 W/m·K and a specified operating temperature range of -50°C to +250°C, the grease is suitable for designated thermal interfaces in hotend assemblies and other temperature-sensitive mechanical or electronic components. Its silicone-based formulation helps fill microscopic surface imperfections that would otherwise trap air and reduce heat transfer efficiency.

Supplied in a convenient 10g tube, Creality Thermal Grease is suitable for printer maintenance, hotend servicing, and thermal component assembly wherever the equipment manufacturer specifies the use of thermal compound.

Key Features

  • Original Creality Thermal Grease: Manufacturer part number 4008060118, designed for thermal management applications.

  • High Thermal Conductivity: Rated at 12 W/m·K to support efficient heat transfer between contacting surfaces.

  • Wide Operating Temperature Range: Specified for temperatures from -50°C to +250°C.

  • Electrically Non-Conductive: Silicone-based formulation helps reduce the risk of electrical short circuits associated with conductive thermal compounds.

  • Non-Corrosive Formulation: Designed for compatibility with suitable metal contact surfaces without causing corrosive reactions.

  • Improved Thermal Contact: Fills microscopic air gaps between mating surfaces to reduce thermal resistance.

  • Suitable for 3D Printer Maintenance: Useful for compatible hotend thermal interfaces and other components requiring thermal compound.

  • 10g Tube Packaging: Allows controlled application during maintenance and component replacement.

High Thermal Conductivity – 12 W/m·K

Thermal grease is used to improve heat transfer between two contacting surfaces.

Even when metal components appear completely smooth, their surfaces contain microscopic imperfections. When two such surfaces are assembled, tiny air gaps remain between them.

Because air conducts heat poorly, these gaps can increase thermal resistance and reduce heat-transfer efficiency.

Creality Thermal Grease fills these irregularities with a thermally conductive compound, helping heat travel more effectively from one component to another.

The specified thermal conductivity of 12 W/m·K makes it suitable for applications where improved thermal contact is required.

Its practical benefits include:

  • Reduced thermal resistance across suitable contact interfaces

  • Improved heat transfer between assembled components

  • More effective heat dissipation where cooling is required

  • Improved thermal coupling between contacting surfaces

  • Support for consistent component operating temperatures

The grease works by improving the thermal connection between components. It does not generate cooling or replace the need for a properly functioning heatsink, fan, or other cooling system.

Thermal Management in 3D Printer Hotends

An FDM 3D printer hotend contains components that must operate at significantly different temperatures.

The heating section must melt filament efficiently, while the upper filament-feeding pathway must remain sufficiently cool to prevent premature filament softening.

Thermal compound can be useful at certain interfaces within this assembly, particularly where heat must transfer efficiently into a heatsink or between designated contacting components.

Heatbreak and Heatsink Interfaces

In compatible hotend designs, thermal compound may be applied to the specified contact area between the heatbreak and heatsink.

Improved thermal contact at this interface helps transfer unwanted heat into the heatsink, where airflow from the hotend cooling fan removes it.

This can help maintain the temperature difference between the hotend's heated and cooled sections.

Hotend Heating Components

Certain hotend designs also use thermal compounds at specified heating-component interfaces to improve heat transfer.

However, the correct compound and application location depend on the particular hotend design.

Important: Thermal grease should not be applied indiscriminately to nozzle threads, heater blocks, ceramic heaters, or the filament pathway. Some hotend interfaces require a different high-temperature compound or are designed to operate without grease.

Always follow the specific printer or hotend manufacturer's assembly instructions.

Helps Maintain Effective Hotend Cooling

One of the important functions of a hotend cooling system is preventing excessive heat from travelling upward into the filament-feeding area.

When heat reaches the wrong section of the hotend, filament may soften or deform before entering the intended melting zone.

This problem is commonly known as heat creep.

In a hotend design that requires thermal compound at the heatsink interface, proper application can improve the transfer of unwanted heat into the cooling system.

However, thermal grease alone cannot resolve heat creep caused by a failed cooling fan, obstructed airflow, damaged heatbreak, or unsuitable printing settings.

It should be considered one part of the complete thermal management system.

Silicone-Based, Electrically Non-Conductive Formula

Creality Thermal Grease uses a silicone-based thermal compound formulated to transfer heat without conducting electricity.

This distinguishes it from certain metal-based or electrically conductive thermal interface materials.

Creality identifies the product as:

  • Electrically non-conductive

  • Non-corrosive

  • Non-toxic

  • Environmentally friendly

Its electrical insulation properties can be beneficial at designated thermal interfaces near electronic assemblies.

However, thermal grease should only be applied to components specifically designed to receive it. Electrical connectors, exposed contacts, and other sensitive parts should remain free from contamination.

Operating Temperature Range – -50°C to +250°C

The thermal grease is specified for operation between:

-50°C and +250°C

This range covers many thermal management applications in 3D printer assemblies.

However, it is important to distinguish the temperature rating of the grease from the maximum nozzle temperature of the printer.

Some modern Creality 3D printers operate at nozzle temperatures of 300°C or 350°C. This does not mean every part of the hotend reaches those temperatures.

The heatsink and other cold-side components normally operate at considerably lower temperatures than the nozzle.

Creality Thermal Grease should therefore be used only at interfaces where the expected operating temperature remains within its specified range.

For locations exposed to temperatures above 250°C, use a thermal compound specifically rated for those conditions and approved for the intended component.

Creality Thermal Grease vs Lubricant Grease

Creality offers both thermal grease and mechanical lubricant grease for printer maintenance. Although their appearance and packaging can be similar, they perform different functions.

FeatureCreality Thermal GreaseCreality Lubricant Grease
Primary FunctionHeat transferMechanical lubrication
Main PurposeReduces thermal resistanceReduces friction and wear
Typical ApplicationSpecified thermal contact surfacesLead screws and suitable moving mechanisms
Thermal Conductivity12 W/m·KNot specified for thermal interface use
Hotend Thermal InterfacesWhere specifically requiredNot suitable
Mechanical Lead ScrewsNot suitableSuitable where specified
Manufacturer Part Number40080601184008060117

Thermal grease is not a mechanical lubricant. It should not be used to lubricate lead screws, linear rails, bearings, or extruder gears.

Likewise, Creality Lubricant Grease should not be substituted for thermal grease in hotend assemblies.

Technical Specifications

SpecificationDetails
BrandCreality
Product NameThermal Grease
Manufacturer Part Number4008060118
Product TypeThermal Interface Compound / Thermal Paste
FormulationSilicone-Based
ColorGrey
Thermal Conductivity12 W/m·K
Operating Temperature Range-50°C to +250°C
Electrical ConductivityNon-Conductive
Corrosion PropertyNon-Corrosive
Net Content10g
ApplicationThermal Contact and Heat Transfer
Primary EquipmentFDM 3D Printers
Additional ApplicationsSuitable Thermal Interfaces in Mechanical and Electronic Assemblies
Manufacturer Packaging Dimensions98 × 30 × 19mm
Manufacturer Gross Package WeightApprox. 15g

Applications

Creality Thermal Grease is suitable for thermal management applications where the equipment manufacturer specifies the use of a compatible thermal interface compound.

Typical applications include:

  • Compatible 3D printer hotend maintenance

  • Specified heatbreak-to-heatsink interfaces

  • Replacement hotend assembly servicing

  • Thermal contact between suitable metal components

  • Heat dissipation interfaces in compatible mechanical assemblies

  • Selected electronic components requiring thermal interface material

  • General repair and maintenance of appropriate thermal assemblies

Its suitability depends on the application temperature, contact materials, and manufacturer requirements rather than the printer brand alone.

How to Apply Thermal Grease

Thermal grease should be applied carefully because its effectiveness depends on the condition and fit of the contacting surfaces.

For applications where thermal compound is specified:

  1. Switch off the printer or equipment and disconnect its power supply.

  2. Allow the components to cool completely before disassembly.

  3. Identify the correct thermal interface according to the manufacturer's instructions.

  4. Remove old thermal compound and contamination from the specified contact surfaces.

  5. Apply a small quantity of thermal grease to the required area.

  6. Spread it into a thin, even layer if recommended by the component manufacturer.

  7. Assemble the components with the correct fit and fastening arrangement.

  8. Remove any excess grease from surrounding areas.

  9. Reassemble the equipment and verify normal operation.

Avoid excessive application. Thermal compound is intended to fill microscopic surface gaps, not create a thick insulating layer between components.

Do not allow the grease to enter the filament pathway, nozzle opening, electrical connectors, or moving mechanisms.

Package Includes

  • 1 × Original Creality Thermal Grease – 10g Tube

Usage Note

This is the original Creality 4008060118 Thermal Grease, designed to improve thermal contact between suitable components in 3D printers and other compatible assemblies.

Use it only at manufacturer-approved thermal interfaces and within its specified operating temperature range of -50°C to +250°C. It is not a substitute for mechanical lubricant grease or specialized high-temperature compounds required by certain hotend designs.

3 other products in the same category:

Customers who bought this product also bought: