NEJE Master 2S Max 810x460mm DIY Laser Engraving CNC Kit with NEJE 30W N40630

Attention: Only buy this product if you have a technical background or/and if you love making stuff. Because this product is a DIY Kit and this is not an assembled machine. 

Note: This Machine comes as a semi-assembled kit. Easy-to-setup assembling process will take 30-90 minutes depending on the user's ability. Customer/User is responsible for assembling the machine and Seller will provide technical assistance when required.

Special Note: 

Diode laser modules do not have a warranty, since it is a consumable product.

The official data of the life of the laser head is 10000-20000 hours, but not guaranteed. Overloading may shorten the life of the laser head.

It is ok to work continuously about 30 minutes, after the laser module cools down about half of an hour (or one hour for better results), then start work again. Long time continuously work will shorten the laser module lifetime.

30W General Specification:

• Model：NEJE Module 30W
• Heatsink Material：Aircraft Aluminum + Brass Shell
• Luminous Color：Blue
• Cooling Mode：Temperature sensor intelligent control + 10000 rpm 40mm cooling fan
• Adapter Plug：5.5 2.1 port
• Can Engrave：MDF/Balsa/Paper/Wood/Fabric/Plastic/Leather/Plywood/Foam Paper/Anodized Aluminum
• Can Not Engrave：Metal/Glass/Stone/Ceramics/PCB/Stainless Steel/Reflective Material/ Transparent Material

Technical Parameters：

• Module Input：20-30W
• Optical Output：7.5W (7500mW)
• Wavelength：445-450nm
• Beam Shape：Dot (Focusable)
• Working Voltage：DC 12V
• TTL & PWM Modulation：YES, Compatible with Both TTL & PWM Modulation
• Input Voltage：DC12V 3A
• PWM/TTL Input：DC3.3V-12V
• Input Interface：PH2.0-4Pin (+,-, PWM/TTL, Temperature), 3Pin (+,-, PWM/TTL) , 2Pin+2Pin (+,-) + (PWM/TTL,-)
• NOTE：Temperature interface can be disconnected，NEJE provides text instructions for temperature acquisition on the wiki.
• Drive Mode：External ACC
• Safe temperature range：<60 ℃
• Module weight：202g
• Life Time：10000-20000 hours

- 【810 x 460 mm】 large engraving area. 6133 x 10800 px, Engraving accuracy: 0.075mm Dot pitch, 339 dot/inch. The whole machine is tested and shipped, and only 6 screws are required to complete the installation.

- 【Advanced laser module】 The laser beam is formed by combining two high-power laser diodes and adopts FAC technology. Support NEJE advanced laser module, Built-in fast intelligent drive, temperature feedback can be timely, and intelligently adjust fan heat dissipation. Safe and quiet to use.

- 【More materials and more clear】 Wood, MDF, leather, paper, cotton etc. are all supported, 

- 【Portable professional control software】 32-bit control system, the fastest speed reaches 150000mm/min, supports LaserGRBL, Lightburn, NEJE software, NEJE APP (Android, iOS, iPad, macOS).