











Original Spare Parts from Creality 3D...
ZSP102878
New product
Warning: Last items in stock!
Availability date:
The Creality Ender-3 V3 SE Hotend Kit with Copper Alloy Nozzles is an original replacement hotend assembly designed specifically for the Creality Ender-3 V3 SE 3D printer. It combines the heating and temperature-sensing components with a filament-melting assembly, providing a practical solution for replacing a damaged or malfunctioning hotend.
This upgraded kit includes two copper-alloy nozzles in 0.4mm and 0.6mm diameters, allowing users to choose between general-purpose precision printing and higher material flow for larger, functional parts. The copper-alloy construction provides efficient thermal conductivity, helping transfer heat into the filament during extrusion.
The hotend assembly incorporates a heater cartridge, thermistor, heater block, heatbreak and PTFE filament guide. Its factory-compatible construction is designed to simplify replacement while maintaining the original printer's heating and extrusion capabilities.
Original Creality Hotend Kit: Manufacturer part number 4001030136, designed specifically for the Ender-3 V3 SE.
Two Copper Alloy Nozzles: Includes 0.4mm and 0.6mm nozzle sizes for different printing requirements.
Efficient Heat Transfer: Copper-alloy nozzles provide good thermal conductivity to support consistent filament melting.
24V 40W Heater Cartridge: Supplies heat to the hotend for controlled filament extrusion.
Integrated Temperature Sensor: Thermistor provides temperature feedback for accurate heater regulation.
Improved Filament Flow: Properly assembled hotend components help minimize leakage and extrusion inconsistencies.
PTFE Filament Guide: Supports smooth filament movement through the hotend's filament pathway.
Direct Replacement Design: Compatible with the original Ender-3 V3 SE hotend mounting and electrical configuration.
Complete Hotend Maintenance Solution: Suitable for replacing damaged heater, thermistor, heatbreak, nozzle and heater-block assemblies.
The hotend is responsible for heating solid filament until it reaches the required extrusion temperature and directing the molten material through the nozzle.
The Creality 4001030136 kit includes the essential components of the Ender-3 V3 SE hotend assembly, reducing the need to source individual replacement parts.
| Component | Function |
|---|---|
| Copper Alloy Nozzle | Controls molten filament extrusion and line width |
| Heater Cartridge | Generates heat for filament melting |
| Heater Block | Transfers heat from the heater to the nozzle |
| Thermistor | Measures hotend temperature for closed-loop temperature control |
| Heatbreak / Throat Tube | Connects the hot and cold sections while restricting unwanted heat transfer |
| PTFE Tube | Guides filament into the hotend |
| Silicone Sock | Insulates the heater block and reduces heat loss |
Replacing the complete hotend can be particularly useful when multiple components are damaged by filament leakage, overheating, or mechanical stress.
Unlike the standard single-nozzle replacement configuration, this kit provides two copper-alloy nozzles with different extrusion diameters.
0.4mm Copper Alloy Nozzle
The 0.4mm nozzle is the standard general-purpose size used on the Ender-3 V3 SE.
It provides a balanced combination of:
Fine print detail
Surface quality
Dimensional accuracy
Printing speed
Material flow
This nozzle is suitable for everyday printing, decorative models, prototypes, and general functional components.
0.6mm Copper Alloy Nozzle
The 0.6mm nozzle has a larger opening, allowing more molten filament to pass through the hotend.
It is particularly useful for:
Larger 3D printed models
Functional parts
Thicker walls
Higher layer heights
Rapid prototyping
Printing where fine surface detail is less important
When the printer's heating and extrusion systems can support the required flow, the 0.6mm nozzle can reduce printing time by allowing wider extrusion lines and thicker layers.
Copper alloys are widely used in high-performance hotend components because of their good thermal conductivity.
Compared with conventional brass nozzles, suitable copper-alloy formulations can provide improved heat transfer, helping maintain consistent filament melting when printing at higher material flow rates.
This is particularly beneficial when using a 0.6mm nozzle, where more filament must be heated during extrusion.
However, copper-alloy nozzles should not automatically be considered hardened or abrasion-resistant nozzles.
For frequent printing with carbon-fiber, glass-fiber, or other highly abrasive filaments, a compatible hardened-steel or wear-resistant nozzle is generally more suitable.
| Feature | 0.4mm Nozzle | 0.6mm Nozzle |
|---|---|---|
| Print Detail | Higher | Moderate |
| Surface Finish Potential | Finer | Coarser |
| Material Flow | Standard | Higher |
| Printing Speed Potential | Good | Higher |
| Typical Layer Heights | Fine to Medium | Medium to Thick |
| Large Models | Good | Better |
| Functional Parts | Good | Very Good |
| Fine Features | Better | Reduced |
Both nozzle sizes are useful for different printing applications.
The 0.4mm nozzle is generally preferred for detailed models, while the 0.6mm nozzle is advantageous when printing larger or stronger functional parts with thicker extrusion lines.
The hotend uses a 24V 40W heater cartridge designed for the Ender-3 V3 SE heating system.
The heater cartridge transfers heat through the metal heater block to the nozzle and filament-melting region.
The thermistor continuously measures the hotend temperature, allowing the printer's control board to regulate heater power and maintain the selected printing temperature.
This combination supports:
Controlled hotend heating
Stable operating temperatures
Consistent filament melting
Temperature monitoring during printing
Reliable extrusion under suitable operating conditions
The Ender-3 V3 SE has a manufacturer-specified maximum nozzle temperature of 260°C.
This limit applies to the printer's complete hotend system. Installing a copper-alloy nozzle does not increase the machine's maximum supported printing temperature.
The standard Ender-3 V3 SE hotend uses a PTFE-lined filament path to guide filament toward the heated nozzle.
PTFE has a low coefficient of friction, helping filament travel smoothly through the assembly.
Correct PTFE tube seating is particularly important because gaps between the filament guide and hotend components can allow softened filament to accumulate, potentially causing clogging or leakage.
The tube should be properly installed and inspected during hotend replacement.
Temperature Consideration: The original PTFE-lined hotend should not be treated as an all-metal high-temperature upgrade. For sustained printing with high-temperature engineering materials, an appropriate all-metal hotend is generally preferable.
When installed on the original Ender-3 V3 SE, the hotend is suitable for filament materials supported by the printer.
Typical materials include:
PLA
PLA+
High-Speed PLA within the hotend's flow capability
PETG
TPU 95A
Other materials may require different temperature, cooling, enclosure, and build-surface conditions.
Material compatibility is determined by the complete printer configuration rather than the nozzle material alone.
| Specification | Details |
|---|---|
| Brand | Creality |
| Product Type | Hotend Replacement Kit |
| Manufacturer Part Number | 4001030136 |
| Compatible Printer | Ender-3 V3 SE |
| Nozzle Material | Copper Alloy |
| Included Nozzle Sizes | 0.4mm and 0.6mm |
| Nozzle Quantity | 2pcs |
| Filament Diameter | 1.75mm |
| Heater Voltage | 24V DC |
| Heater Power | 40W |
| Temperature Sensor | Thermistor |
| Maximum Printer Nozzle Temperature | 260°C |
| Hotend Construction | Heater Block, Heatbreak and PTFE-Lined Filament Path |
| Package Dimensions | 105 × 43 × 33mm |
| Gross Package Weight | Approx. 64g |
This hotend kit is specifically designed for:
Creality Ender-3 V3 SE
It is intended to replace the corresponding original hotend assembly without requiring a different hotend mounting system.
Although the Ender-3 V3 SE and Ender-3 V3 KE have similar names, they use different hotend configurations.
This kit should not be assumed compatible with:
Creality Ender-3 V3 KE
Creality Ender-3 V3
Creality Ender-3 V3 Plus
Creality K1 Series
Always match the hotend assembly to the printer's exact model and installed hotend design.
A complete hotend replacement may be appropriate when the existing assembly develops faults that cannot be resolved by routine cleaning or individual component replacement.
Common reasons include:
Persistent filament clogging
Filament leakage around the heater block
Damaged nozzle threads
Broken or damaged heater cartridge
Faulty temperature sensor
Damaged heatbreak or throat tube
Severe filament accumulation around the hotend
Irregular heating caused by damaged hotend components
Before replacing the complete assembly, check the filament path, extruder, cooling fan, electrical connectors, and temperature-sensor wiring to identify the actual cause of the problem.
The kit is designed for installation in the original Ender-3 V3 SE hotend position.
For replacement:
Unload the filament and allow the existing hotend to cool.
Switch off the printer and disconnect its power supply.
Remove the printhead cover as required to access the hotend.
Carefully disconnect the heater and thermistor connections.
Remove the damaged hotend assembly.
Install the replacement hotend in the original mounting position.
Reconnect the heater and temperature-sensor wiring.
Ensure the PTFE filament path is correctly seated.
Reassemble the printhead and inspect the hotend cooling system.
Perform the required temperature, homing, and first-layer checks before printing.
Follow Creality's official service procedure when replacing the hotend or changing the nozzle.
When switching between the included 0.4mm and 0.6mm nozzles, the printer's slicing settings must match the installed nozzle diameter.
Important settings include:
Nozzle diameter
Extrusion line width
Layer height
Maximum volumetric flow
Printing speed
Temperature
Retraction settings
Using a 0.4mm slicer profile with a physically installed 0.6mm nozzle can cause incorrect extrusion and reduced print quality.
After changing nozzle size, select an appropriate slicer profile and perform a small test print before beginning a larger project.
1 × Creality Ender-3 V3 SE Hotend Assembly
1 × 0.4mm Copper Alloy Nozzle
1 × 0.6mm Copper Alloy Nozzle
Heater Cartridge and Thermistor Assembly
PTFE Filament Guide Tube
The heater, thermistor, and related hotend components form part of the assembled kit. The two nozzles are the total supplied nozzle quantity, not two additional nozzles beyond any already installed.
This is the original Creality 4001030136 Hotend Kit, supplied with both 0.4mm and 0.6mm copper-alloy nozzle options for the Ender-3 V3 SE.
Use the 0.4mm nozzle for general-purpose and detailed printing, or the 0.6mm nozzle for larger parts and higher material flow. After changing nozzle diameter, ensure the slicer is configured for the installed nozzle.
This kit is specific to the Ender-3 V3 SE and should not be confused with the different hotend assemblies used by the Ender-3 V3 KE or Ender-3 V3.

Rs 3,100.00

Rs 2,200.00

Rs 1,850.00

Rs 1,850.00

Rs 7,000.00

Rs 3,700.00

Rs 3,500.00

Rs 5,600.00

Rs 8,800.00

Rs 8,800.00

Rs 8,500.00

Rs 3,700.00

Rs 5,300.00

Rs 2,500.00

Rs 2,400.00

Rs 8,600.00

Rs 5,400.00

Rs 1,700.00

Rs 7,600.00

Rs 1,900.00

Rs 1,900.00

Rs 2,400.00

Rs 4,500.00

Rs 8,200.00

Rs 8,200.00

Rs 17,000.00

Rs 20,500.00

Rs 9,400.00

Rs 5,200.00

Rs 7,800.00
6 Months Warranty