Lubricant and Thermal Grease

Specials

Creality Lubricant Grease for CNC and 3D Printer Parts

ZSP102880

New product

Rs 690.00

Estimated Delivery: 1 to 3 days

Add to wishlist

More info

The Creality Lubricant Grease for CNC and 3D Printer Parts is an original mechanical maintenance lubricant designed to reduce friction, wear, and operating noise in compatible moving machine components. It is particularly suitable for maintaining the lead screws, linear guide rods, rails, gears, and other mechanical motion components found in FDM 3D printers and suitable CNC equipment.

Featuring a high-lubricity, paste-type formulation, the grease forms a protective lubricating layer between moving surfaces, helping reduce direct metal-to-metal contact and mechanical resistance. Its consistency allows the lubricant to remain on the application surface rather than flowing away as readily as a thin liquid oil.

Supplied in a convenient 10g tube, the Creality lubricant is designed for periodic machine maintenance. Regular lubrication at manufacturer-specified points helps maintain smooth axis movement, reduce friction-related noise, and minimize premature wear of mechanical components.

Key Features

  • Original Creality Lubricant Grease: Manufacturer part number 4008060117, intended for mechanical maintenance.

  • High-Lubricity Formulation: Reduces friction between compatible moving mechanical surfaces.

  • Wear Protection: Helps minimize surface wear caused by repeated sliding and rotating contact.

  • Noise Reduction: Reduces friction-related squeaking and operating noise from inadequately lubricated components.

  • Paste-Type Consistency: Adheres to application surfaces and resists flowing away compared with thinner lubricants.

  • Corrosion Protection: Helps protect suitable exposed metal surfaces against moisture-related rust and corrosion.

  • Wide Mechanical Applications: Suitable for designated lubrication points on 3D printers, CNC machines, and other motion systems.

  • Low-Odor Formulation: Creality describes the product as odorless, non-toxic, and environmentally friendly.

  • Convenient 10g Tube: Allows controlled application during maintenance without requiring a separate grease applicator.

Reduces Friction and Mechanical Wear

Moving mechanical components experience friction whenever surfaces slide or rotate against one another.

In 3D printers and CNC machines, this commonly occurs in lead screws, guide mechanisms, gear assemblies, and other motion components.

Without appropriate lubrication, repeated movement can gradually cause:

  • Increased mechanical resistance

  • Friction-related noise

  • Accelerated surface wear

  • Irregular or less smooth motion

  • Additional load on the drive system

Creality Lubricant Grease creates a lubricating film between suitable moving surfaces, helping reduce direct contact between the mechanical components.

This can contribute to smoother operation and longer component service life when used correctly.

However, lubrication cannot repair damaged bearings, worn lead screws, bent guide rods, or mechanical misalignment.

Long-Lasting Paste-Type Lubrication

Unlike thin lubricating oils that can spread or flow away from the application area, Creality Lubricant Grease has a paste-like consistency designed to remain on the treated surface.

This makes it useful for components that require a persistent lubricating film during repeated movement.

The grease helps maintain lubrication between servicing intervals and reduces the need for excessively frequent reapplication.

Its formulation also provides a protective layer on suitable metal surfaces, helping reduce exposure to moisture and corrosion.

The actual lubrication interval depends on operating conditions, machine usage, environmental contamination, and the manufacturer's maintenance instructions.

Lubrication for 3D Printer Motion Systems

FDM 3D printers contain several mechanical components that may require periodic lubrication.

Z-Axis Lead Screws

Threaded lead screws convert motor rotation into linear movement.

Lubricating the screw threads helps reduce friction between the screw and its corresponding nut, supporting smoother Z-axis movement.

This is particularly important on printers where the Z-axis repeatedly travels along a threaded lead screw.

Linear Guide Rods and Rails

Suitable guide rods and linear rail assemblies require controlled lubrication to minimize friction and wear.

A thin layer of the appropriate grease can support smoother movement of compatible sliding components.

Different linear guide systems may require different lubricant formulations, so the machine or rail manufacturer's requirements should be followed.

Mechanical Gears and Moving Assemblies

Certain enclosed or exposed gear mechanisms may also require lubrication.

Where grease is specified, proper application helps reduce surface contact and friction-related wear between the moving gear teeth.

Not every extruder, bearing, or gear mechanism is designed for user-applied grease. Sealed assemblies and self-lubricating components should be maintained according to their manufacturer's instructions.

Applications in CNC Machines and Linear Motion Equipment

Although Creality primarily markets this product for 3D printer maintenance, mechanical lubrication is also relevant to CNC machines and other equipment using compatible motion components.

Potential applications include:

  • CNC router lead screws

  • Suitable linear guide mechanisms

  • Threaded positioning assemblies

  • Compatible sliding metal components

  • Selected gear-driven mechanisms

  • DIY mechanical automation equipment

For CNC machinery, lubricant selection should follow the component manufacturer's requirements.

Some CNC linear guides, ball screws, and bearing systems require lubricants with specific viscosity, consistency, or additive characteristics.

Important: Do not assume this grease is suitable for every CNC spindle bearing, high-speed bearing, linear guide carriage, or industrial lubrication system. Use it only where its suitability has been established.

Creality Lubricant Grease vs Thermal Grease

Creality manufactures both mechanical lubricant grease and thermal grease, but these are designed for different purposes.

FeatureCreality Lubricant GreaseCreality Thermal Grease
Primary PurposeMechanical lubricationHeat transfer
Main FunctionReduces friction and wearImproves thermal contact
Typical ApplicationLead screws, compatible rails and motion componentsSpecified hotend thermal interfaces
Mechanical Wear ProtectionYesNot its intended function
Hotend Thermal InterfaceNot SuitableSuitable where specified
Creality Part Number40080601174008060118

The distinction is important during 3D printer maintenance.

Lubricant grease should not be applied as a substitute for thermal compound between hotend components. Likewise, thermal grease should not be used as a general replacement for mechanical lubrication.

Technical Specifications

SpecificationDetails
BrandCreality
Product NameLubricant Grease
Manufacturer Part Number4008060117
Product TypeMechanical Lubricating Grease
Physical FormPaste / Grease
Net Content10g
ApplicationMechanical Lubrication
Main FunctionFriction Reduction, Wear Protection, Noise Reduction
Application MethodManual Application
Typical Maintenance AreasLead Screws, Suitable Linear Guides, Rods and Gears
Primary EquipmentFDM 3D Printers
Additional ApplicationsCompatible CNC and Linear Motion Components
Manufacturer Packaging Dimensions98 × 30 × 19mm
Manufacturer Gross Package WeightApprox. 15g

Applications

Creality Lubricant Grease can be used for maintenance applications including:

  • FDM 3D printer Z-axis lead screws

  • Compatible linear guide rods and rails

  • Suitable threaded motion mechanisms

  • Selected mechanical gears

  • Compatible CNC router motion components

  • DIY linear motion assemblies

  • General maintenance of designated lubrication points

Compatibility depends on the mechanical component, operating environment, and lubricant requirements rather than the machine brand alone.

How to Apply Lubricant Grease

For effective lubrication, apply the grease only to components that are intended to receive it.

  1. Switch off the machine and disconnect the power supply.

  2. Identify the lubrication points specified in the equipment's maintenance instructions.

  3. Clean away accumulated dust, debris, and contaminated old grease using an appropriate method.

  4. Apply a small, even quantity of Creality Lubricant Grease to the required contact surfaces.

  5. Move the relevant axis or mechanism according to the manufacturer's procedure to distribute the lubricant.

  6. Remove excessive grease that accumulates around the moving components.

  7. Inspect the mechanism for smooth operation before returning the machine to normal use.

Avoid applying excessive quantities. Surplus grease can attract dust and debris, particularly in open-frame machines and workshop environments.

Do Not Apply To:

  • Timing belts and belt teeth

  • Build plates or printing surfaces

  • Electronic circuits and electrical connectors

  • Hotend heating interfaces

  • Components designed to operate dry

  • Sealed bearings or mechanisms that do not permit external lubrication

Always refer to the machine manufacturer's maintenance instructions before applying grease to an unfamiliar component.

Package Includes

  • 1 × Original Creality Lubricant Grease – 10g Tube

Usage Note

This is the original Creality 4008060117 Lubricant Grease, intended for maintaining suitable moving mechanical components in 3D printers and compatible CNC equipment.

Apply a small amount to manufacturer-approved lubrication points, particularly lead screws and compatible guide mechanisms. This is a mechanical lubricant, not hotend thermal grease, and should not be used on timing belts, electronic components, or mechanisms requiring a different lubricant specification.

3 other products in the same category:

Customers who bought this product also bought: