ANTINSKY Elastic Pro+ Resin LCD 405nm UV Sensitive Resin 500g

Color: Transparent Yellow

ANTINSKY Elastic Pro+ Resin is a 405nm UV-sensitive resin designed for flexible and elastic resin 3D printing applications. It is suitable for users who need printed parts with softness, rebound, and deformation resistance compared with standard rigid resin.

The transparent yellow finish makes it useful for visual prototypes, flexible test parts, cushioning components, soft structural models, and resin prints where flexibility is more important than hard surface rigidity. It is especially suitable for users testing elastic designs, functional samples, and parts that need to bend or compress during handling.

As an engineering resin, ANTINSKY Elastic Pro+ is best used with properly calibrated LCD resin 3D printers. Exposure settings, support design, wall thickness, and post-curing time should be adjusted carefully, as flexible resins behave differently from standard rigid resins during printing and cleaning.

Key Features

• 405nm UV-sensitive elastic resin
• 500g bottle size
• Transparent yellow resin finish
• Designed for flexible and soft printed parts
• Suitable for functional prototypes and elastic model testing
• Useful for cushioning, bending, and deformation-resistant designs
• Compatible with LCD resin 3D printers using 405nm UV resin
• Suitable for engineering and experimental resin printing workflows

Flexible Resin Printing

ANTINSKY Elastic Pro+ Resin is designed for prints that require flexibility rather than rigid strength. Printed parts can bend, compress, or deform depending on the model geometry, thickness, curing level, and printer settings.

This makes it suitable for prototypes such as soft connectors, flexible pads, cushioning parts, protective covers, grips, and experimental elastic structures.

Transparent Yellow Finish

The transparent yellow appearance gives printed parts a clean engineering-style look while allowing some visibility through the material depending on model thickness and curing conditions. This can be useful for demonstration parts, design samples, and flexible prototypes where the internal structure or wall thickness needs to be visually inspected.

Suitable for Functional Prototypes

Elastic resin is useful when testing fit, feel, compression, bending behavior, or soft-contact surfaces. It can help designers evaluate flexible parts before moving to final material selection or production.

For parts requiring certified load-bearing performance, medical use, long-term outdoor use, or high-temperature resistance, suitability should be tested carefully before final application.

Printing Considerations

Flexible resins can require different settings compared with standard resin. Support placement, exposure time, lift speed, cleaning method, and post-curing time should be tested and adjusted according to the printer and model design.

Thin features may behave differently from thick sections, so test prints are recommended before producing final functional parts.

Post-Processing

After printing, parts should be cleaned carefully with a suitable resin cleaning solution or IPA, then fully dried before UV post-curing. Avoid excessive soaking, as long cleaning times may affect surface quality or material behavior.

Post-curing should be controlled according to the required final flexibility. Over-curing may make flexible resin parts stiffer, while under-curing may leave parts weak or tacky.

Safety and Handling

Always handle uncured resin with gloves and work in a well-ventilated area. Avoid skin and eye contact, keep resin away from children and pets, and store the bottle away from direct sunlight.

Liquid resin and cleaning waste should be disposed of according to local resin safety and waste-handling guidelines.

Technical Specifications

Applications

• Flexible prototypes
• Soft model parts
• Cushioning components
• Protective pads and covers
• Grips and soft-touch parts
• Elastic connectors
• Bending test samples
• Design validation models
• Functional resin experiments
• Engineering concept models

Compatibility

• Compatible with LCD resin 3D printers using 405nm UV resin
• Suitable for resin slicer workflows with proper exposure calibration
• Compatible with standard resin cleaning and UV curing workflows
• Printer settings should be tested before final functional printing