ANTINSKY Temporary Dental Model Resin LCD 405nm UV Sensitive Resin 500g

ANTINSKY Temporary Dental Model Resin is a 405nm UV-sensitive resin designed for dental model printing on compatible LCD and DLP resin 3D printers. With tooth-colored shade options and a smooth cured surface, it is suitable for producing dental models, temporary model samples, study models, and detailed dental workflow prints.

The resin is formulated for low shrinkage, helping printed models maintain better dimensional stability after curing. This is important for dental model applications where clean detail, stable fit, and accurate surface reproduction are required.

With a cured hardness of 80–90D, the printed models can be polished and tapped after proper post-processing. It is a practical option for dental laboratories, clinics, training environments, and resin printing users who require tooth-colored model resin for professional visual and fitting work.

Key Features

• 405nm UV-sensitive dental model resin

• Suitable for compatible LCD and DLP resin 3D printers

• 500g bottle size

• Tooth-colored shade options including A1, A2, and A3

• Low shrinkage for improved dimensional stability

• Smooth cured surface with good detail reproduction

• Cured hardness of approximately 80–90D

• Suitable for polishing and model finishing after curing

Dental Model Printing

ANTINSKY Temporary Dental Model Resin is designed for producing detailed dental model prints with a tooth-colored appearance. It is suitable for visual models, temporary dental samples, training models, and dental workflow applications where surface detail and color tone are important.

The tooth-colored finish helps printed parts look more natural compared with standard grey or beige model resins, making it useful for presentation models and dental case planning.

Low Shrinkage for Dimensional Stability

Low shrinkage helps printed models retain their intended shape and size during the curing process. This supports better model accuracy and makes the resin suitable for applications where dimensional consistency is important.

Proper printer calibration, exposure settings, support placement, cleaning, and curing are essential for achieving reliable results.

Smooth Surface and High Hardness

After curing, the resin produces a smooth surface with good mechanical hardness. The cured model hardness of approximately 80–90D allows printed parts to be polished and worked on for model finishing.

This makes it suitable for dental models and visual samples that require clean surface appearance and stable handling.

Fast Printing Workflow

The resin is compatible with most 405nm LCD and DLP resin printers and is designed for efficient printing, with listed printing performance of around 3 seconds per layer depending on the printer and settings.

Actual exposure time may vary based on printer model, layer height, resin color, screen type, room temperature, and calibration.

Important Usage Note

This resin should be used according to its intended dental model application and manufacturer guidance. Do not use printed parts for direct intraoral applications unless the relevant certification, biocompatibility approval, and professional usage instructions are clearly provided for that exact resin.

Always follow proper resin handling practices, including gloves, ventilation, cleaning, and UV post-curing.

Post-Processing

After printing, models should be cleaned with suitable resin cleaning solution or IPA, dried fully, and post-cured using a compatible UV curing device. Correct post-processing helps achieve the final hardness, surface finish, and dimensional stability.

Avoid prolonged soaking in alcohol, as excessive cleaning time may affect the final surface quality of resin prints.

Technical Specifications

Applications

• Dental model printing

• Temporary dental model samples

• Tooth-colored visual models

• Study models

• Dental training models

• Dental laboratory workflow prints

• Case presentation models

• Detailed resin model printing

Compatibility

• Compatible LCD resin 3D printers using 405nm UV resin

• Compatible DLP resin 3D printers using 405nm UV resin

• Standard resin slicer workflows with proper exposure calibration

• UV curing and resin cleaning workflows

Package Includes

• 1 × ANTINSKY Temporary Dental Model Resin LCD 405nm UV Sensitive Resin 500g